D-Link DWS-1008 Informations techniques télécharger pdf (Page 347)

346

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

RF Detection Commands

show rfdetect data Output

Field Description

BSSID MAC address of the SSID used by the detected device.

Vendor Company that manufactures or sells the rogue device.

Type Classiﬁcation of the rogue device:

• rogue - Wireless device that is not supposed to be on

the network. The device has an entry in a switch’s FDB

and is therefore on the network.

• intfr - Wireless device that is not part of your network

but is not a rogue. The device does not have an entry in

a switch’s FDB and is not actually on the network, but

might be causing RF interference with AP radios.

• known - Device that is a legitimate member of the

network.

Port/Radio/Channel Port number, radio number, and channel number of

the radio that detected the rogue. For a Distributed AP,

the connection number is labeled dap. (This stands for

distributed AP.)

Flags Classiﬁcation and encryption information for the rogue:

• The i, a, or u ﬂag indicates the classiﬁcation.

• The other ﬂags indicate the encryption used by the

rogue.

For ﬂag deﬁnitions, see the key in the command output.

RSSI Received signal strength indication (RSSI)—the strength

of the RF signal detected by the AP radio, in decibels

referred to 1 milliwatt (dBm).

Age Number of seconds since an AP radio last detected

802.11 packets from the device.

SSID SSID used by the detected device.

show rfdetect ignore

Displays the BSSIDs of third-party devices that MSS ignores during RF scans. MSS does

not generate log messages or traps for the devices in the ignore list.

Syntax: show rfdetect ignore

Defaults: None.

Access: Enabled.

1 2 ... 342 343 344 345 346 347 348 349 350 351 352 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 347