D-Link DWS-1008 Informations techniques télécharger pdf (Page 239)

100

101

238

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

STP Commands

Access: Enabled.

Examples: The following command changes the cost on ports 3 and 4 to 20 in VLAN mauve:

DWS-1008# set spantree portvlancost 3,4 cost 20 vlan mauve

success: change accepted.

set spantree portvlanpri

Changes the priority of a network port or ports for selection as part of the path to the STP

root bridge, on one VLAN or all VLANs.

Syntax: set spantree portvlanpri port-list priority value {all | vlan vlan-id}

port-list List of ports. MSS changes the priority on the

speciﬁed ports.

priority

value

Priority value. You can specify a value from 0

(highest priority) through 255 (lowest priority).

all

Changes the priority on all VLANs.

vlan vlan-id VLAN name or number. MSS changes the priority

on only the speciﬁed VLAN.

Defaults: The default STP priority for all network ports is 128.

Access: Enabled.

Examples: The following command sets the priority of ports 3 and 4 to 48 on VLAN mauve:

DWS-1008# set spantree portvlanpri 3-4 priority 48 vlan mauve

success: change accepted.

set spantree priority

Changes the STP root bridge priority of a switch on one or all of its VLANs.

Syntax: set spantree priority value {all | vlan vlan-id}

priority

value

Priority value. You can specify a value from

0 through 65,535. The bridge with the lowest

priority value is elected to be the root bridge for

the spanning tree.

all

Changes the bridge priority on all VLANs.

1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 239

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008