D-Link DWS-1008 Informations techniques télécharger pdf (Page 242)

100

101

241

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

STP Commands

Output for show spantree

Field Description

VLAN VLAN number.

Spanning tree mode In the current software version, the mode

is always PVST+, which means Per VLAN

Spanning Tree+.

Spanning tree type In the current software version, the type is

always IEEE, which means STP is based on

the IEEE 802 standards.

Spanning tree

enabled

State of STP on the VLAN.

Designated Root MAC address of the spanning tree’s root

bridge.

Designated Root

Priority

Bridge priority of the root bridge.

Designated Root

Path Cost

Cumulative cost from this bridge to the root

bridge. If this switch is the root bridge, then the

root cost is 0.

Designated Root

Port

Port through which this switch reaches the

root bridge.

If this switch is the root bridge, this ﬁeld says

We are the root.

Root Max Age Maximum acceptable age for hello packets on

the root bridge.

Root Hello Time Hello interval on the root bridge.

Root Forward Delay Forwarding delay value on the root bridge.

Bridge ID MAC

ADDR

This switch’s MAC address.

Bridge ID Priority This switch’s bridge priority.

Bridge Max Age This switch’s maximum acceptable age for

hello packets.

Bridge Hello Time This switch’s hello interval.

Bridge Forward

Delay

This switch’s forwarding delay value.

Port Port number.

Note: Only network ports are listed. STP does not

apply to DWL-8200AP access point ports or wired

authentication ports.

Vlan VLAN ID.

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 242

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008