252
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
IGMP Snooping Commands
IGMP Snooping Commands
Use Internet Group Management Protocol (IGMP) snooping commands to configure and
manage multicast traffic reduction on a switch.
clear igmp statistics
Clears IGMP statistics counters on one VLAN or all VLANs on a switch and resets them to
0.
Syntax: clear igmp statistics [vlan vlan-id]
vlan vlan-id VLAN name or number. If you do not specify a
VLAN, IGMP statistics are cleared for all VLANs.
Defaults: None.
Access: Enabled.
Examples: The following command clears IGMP statistics for all VLANs:
DWS-1008# clear igmp statistics
IGMP statistics cleared for all vlans
set igmp
Disables or reenables IGMP snooping on one VLAN or all VLANs on a switch.
Syntax: set igmp {enable | disable} [vlan vlan-id]
enable
Enables IGMP snooping.
disable
Disables IGMP snooping.
vlan vlan-id VLAN name or number. If you do not specify a
VLAN, IGMP snooping is disabled or reenabled
on all VLANs.
Defaults: IGMP snooping is enabled on all VLANs by default.
Access: Enabled.
Examples: The following command disables IGMP snooping on VLAN orange:
Commentaires sur ces manuels