D-Link DWS-1008 Informations techniques télécharger pdf (Page 221)

220

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Access Point Commands

show auto-tune neighbors

Displays the other D-Link radios and third-party 802.11 radios that a D-Link radio can hear.

Syntax: show auto-tune neighbors [ap ap-num

[radio {1 | 2| all}]]

Syntax: show auto-tune neighbors [dap dap-num

[radio {1 | 2| all}]]

ap-num AP port connected to the DWL-8220AP access point for which to

display neighbors.

dap-num Number of a Distributed AP for which to display neighbors.

radio 1 Shows neighbor information for radio 1.

radio 2 Shows neighbor information for radio 2. (This option does not apply to

single-radio models.)

radio all Shows neighbor information for both radios.

Defaults: None.

Access: Enabled.

Usage: For simplicity, this command displays a single entry for each D-Link radio,

even if the radio is supporting multiple BSSIDs. However, BSSIDs for

third-party 802.11 radios are listed separately, even if a radio is supporting

more than one BSSID.

Information is displayed for a radio if the radio sends beacon frames or

responds to probe requests. Even if a radio’s SSIDs are unadvertised,

D-Link radios detect the empty beacon frames (beacon frames without

SSIDs) sent by the radio, and include the radio in the neighbor list.

Examples: The following command displays neighbor information for radio 1 on the

directly connected DWL-8220AP access point on port 2:

DWS-1008# show auto-tune neighbors ap 2 radio 1

Total number of entries for port 2 radio 1: 5

Channel Neighbor BSS/MAC RSSI

-----------------------------------------------------------------------------------------------------------------------

1 00:0b:85:06:e3:60 -46

1 00:0b:0e:00:0a:80 -78

1 00:0b:0e:00:d2:c0 -74

1 00:0b:85:06:dd:00 -50

1 00:0b:0e:00:05:c1 -72

The table describes the ﬁelds in this display.

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 221