D-Link DWS-1008 Informations techniques Page 227

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 406
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 226
226
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
Access Point Commands
RTS Threshold Minimum length (in bytes) a frame can be for a radio in the radio
profile to use the RTS/CTS method to send the frame. The RTS/CTS
method clears the air of other traffic to avoid corruption of the frame
due to a collision with another frame.
-----------------------------------------------------------------------------------------------------------------------
Frag Threshold Maximum length (in bytes) a frame is allowed to be without being
fragmented into multiple frames before transmission by a radio in the
radio profile.
-----------------------------------------------------------------------------------------------------------------------
Short Retry Limit Number of times a radio in the radio profile can send a short unicast
frame without receiving an acknowledgment.
-----------------------------------------------------------------------------------------------------------------------
Long Retry Limit Number of times a radio in the radio profile can send a long unicast
frame without receiving an acknowledgment. A long unicast frame is
a frame that is equal to or longer than the RTS threshold.
-----------------------------------------------------------------------------------------------------------------------
Long Preamble Indicates whether an 802.11b radio that uses this radio profile
advertises support for frames with long preambles only:
YES - Advertises support for long preambles only.
NO - Advertises support for long and short preambles.
-----------------------------------------------------------------------------------------------------------------------
Allow 802.11g Indicates whether the 802.11b/g radios in the radio profile restrict
clients only associations to 802.11g clients only:
No - 802.11b/g radios allow associations with both 802.11b and
802.11g clients.
No - 802.11b/g radios allow associations with 802.11g clients
only.
Note: This field applies only to 802.11b/g radios.
-----------------------------------------------------------------------------------------------------------------------
Tune Channel Indicates whether RF Auto-Tuning is enabled for dynamically setting
and tuning channels.
-----------------------------------------------------------------------------------------------------------------------
Tune Power Indicates whether RF Auto-Tuning is enabled for dynamically setting
and tuning power levels.
-----------------------------------------------------------------------------------------------------------------------
Tune Channel Interval Interval, in seconds, at which RF Auto-Tuning decides whether to
change the channels on radios in a radio profile. At the end of each
interval, MSS processes the results of the RF scans performed
during the previous interval, and changes radio channels if needed.
-----------------------------------------------------------------------------------------------------------------------
Tune Power Interval Interval, in seconds, at which RF Auto-Tuning decides whether to
change the power level on radios in a radio profile. At the end of
each interval, MSS processes the results of the RF scans performed
during the previous interval, and changes radio power levels if
needed.
-----------------------------------------------------------------------------------------------------------------------
Vue de la page 226
1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 405 406

Commentaires sur ces manuels

Pas de commentaire