233
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
STP Commands
vlan vlan-id VLAN name or number. MSS enables or disables
STP on only the specified VLAN, on all ports
within the VLAN.
port port-list
vlan-id
Port number or list and the VLAN the ports are
in. MSS enables or disables STP on only the
specified ports, within the specified VLAN.
Defaults: Disabled.
Access: Enabled.
Examples: The following command enables STP on all VLANs configured on a switch:
DWS-1008# set spantree enable
success: change accepted.
The following command disables STP on VLAN burgundy:
DWS-1008# set spantree disable vlan burgundy
success: change accepted.
set spantree backbonefast
Enables or disables STP backbone fast convergence on a switch. This feature accelerates
a port’s recovery following the failure of an indirect link.
Syntax: set spantree backbonefast {enable | disable}
enable
Enables backbone fast convergence.
disable
Disables backbone fast convergence.
Defaults: STP backbone fast path convergence is disabled by default.
Access: Enabled.
Usage: If you plan to use the backbone fast convergence feature, you must enable it
on all the bridges in the spanning tree.
Examples: The following command enables backbone fast convergence:
DWS-1008# set spantree backbonefast enable
success: change accepted.
Commentaires sur ces manuels