D-Link DWS-1008 Informations techniques télécharger pdf (Page 240)

100

101

239

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

STP Commands

vlan vlan-id VLAN name or number. MSS changes the bridge

priority on only the speciﬁed VLAN.

Defaults: The default root bridge priority for the switch on all VLANs is 32,768.

Access: Enabled.

Examples: The following command sets the bridge priority of VLAN pink to 69:

DWS-1008# set spantree priority 69 vlan pink

success: change accepted.

set spantree uplinkfast

Enables or disables STP uplink fast convergence on a switch. This feature enables a switch

with redundant links to the network backbone to immediately switch to the backup link to the

root bridge if the primary link fails.

Syntax: set spantree uplinkfast {enable | disable}

enable

Enables uplink fast convergence.

disable

Disables uplink fast convergence.

Defaults: Disabled.

Access: Enabled.

Usage: The uplink fast convergence feature is applicable to bridges that are acting as

access switches to the network core (distribution layer) but are not in the core

themselves. Do not enable the feature on switches that are in the network

core.

Examples: The following command enables uplink fast convergence:

DWS-1008# set spantree uplinkfast enable

success: change accepted.

show spantree

Displays STP conﬁguration and port-state information.

Syntax: show spantree [port-list | vlan vlan-id] [active]

port-list List of ports. If you do not specify any ports, MSS

displays STP information for all ports.

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 240

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008