D-Link DWS-1008 Informations techniques télécharger pdf (Page 396)

395

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Boot Prompt Commands

Displays a list of the boot prompt commands.

Syntax: ls

Defaults: None.

Access: Boot prompt.

Usage: To display help for an individual command, type help followed by the command name

(for example, help boot).

Examples: To display a list of the commands available at the boot prompt, type the

following command:

boot> ls

ls Display a list of all commands and descriptions.

help Display help information for each command.

autoboot Display the state of, enable, or disable the autoboot option.

boot Load and execute an image using the current boot conﬁguration proﬁle.

change Change the current boot conﬁguration proﬁle.

create Create a new boot conﬁguration proﬁle.

delete Delete the current boot conﬁguration proﬁle.

next Select the next boot conﬁguration proﬁle.

show Display the current boot conﬁguration proﬁle.

dir Display the contents of the speciﬁed boot partition.

fver Display the version of the loadable image speciﬁed by device:ﬁlename.

version Display HW and Bootstrap/Bootloader version information.

reset Reset the system.

test Display the state of, enable, or disable the tests option.

diag Access the diagnostic command CLI.

Activates and displays the boot proﬁle in the next boot proﬁle slot.

Syntax: next

Defaults: None.

Access: Boot prompt.

Usage: A DWS-1008 switch contains 4 boot proﬁle slots, numbered 0 through 3. This

command activates the boot proﬁle in the next slot, in ascending numerical order. If

the currently active slot is 3, the command activates the boot proﬁle in slot 0.

1 2 ... 391 392 393 394 395 396 397 398 399 400 401 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 396