D-Link DWS-1008 Informations techniques télécharger pdf (Page 398)

100

101

397

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Boot Prompt Commands

show

Displays the currently active boot proﬁle. A boot proﬁle is a set of parameters that a switch

uses to control the boot process. Each boot proﬁle contains the following parameters:

• Boot type - Either compact ﬂash (local device on the switch) or network (TFTP)

• Boot device - Location of the system image ﬁle

• Filename - System image ﬁle

• Flags - Number representing the bit settings of boot ﬂags to pass to the booted

system image.

• Options - String up to 128 bytes of boot options to pass to the booted system image

A switch can have up to four boot proﬁles, numbered 0 through 3. Only one boot proﬁle can

be active at a time. You can create, change, and delete boot proﬁles. You also can activate

another boot proﬁle in place of the currently active one.

Syntax: show

Defaults: None.

Access: Boot prompt.

Examples: To display the currently active boot proﬁle, type the following command at the

boot prompt:

boot> show

BOOT Index: 0

BOOT TYPE: c

DEVICE: boot1:

FILENAME: default

FLAGS: 00000000

OPTIONS: run=nos;boot=0

The table on the next page describes the ﬁelds in the display.

1 2 ... 393 394 395 396 397 398 399 400 401 402 403 404 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 398

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008