D-Link DWS-1008 Informations techniques télécharger pdf (Page 77)

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

IP Services Commands

set snmp community (continued)

Defaults: None Access: Enabled

Usage: SNMP community strings are passed as clear text in SNMPv1 and SNMPv2c. D-Link

recommends that you use strings that cannot easily be guessed by unauthorized

users. For example, do not use the well-known strings public and private.

If you are using SNMPv3, you can conﬁgure SNMPv3 users to use authentication and to

encrypt SNMP data.

Examples: The following command conﬁgures the read-write community good_community:

DWS-1008# set snmp community read-write good_community

success: change accepted.

The following command conﬁgures community string switchmgr1 with access level

notify-read-write:

DWS-1008# set snmp community name switchmgr1 notify-read-write

success: change accepted.

set snmp notify target

Conﬁgures a notiﬁcation target for informs from SNMP.

A notiﬁcation target is a remote device to which MSS sends SNMP notiﬁcations. You can

conﬁgure the MSS SNMP engine to send conﬁrmed notiﬁcations (informs) or unconﬁrmed

notiﬁcations (traps). Some of the command options differ depending on the SNMP version

and the type of notiﬁcation you specify. You can conﬁgure up to 10 notiﬁcation targets.

SNMPv3 with Informs

To conﬁgure a notiﬁcation target for informs from SNMPv3, use the following command:

Syntax: set snmp notify target target-num ip-addr[:udp-port-number]

usm inform user username

snmp-engine-id {ip | hex hex-string} [proﬁle proﬁle-name]

[security {unsecured | authenticated | encrypted}]

[retries num]

[timeout num]

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 77