D-Link DWS-1008 Informations techniques télécharger pdf (Page 89)

100

101

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

IP Services Commands

set snmp usm (continued)

usm-username Name of the SNMPv3 user. Specify between 1 and 32

alphanumeric characters, with no spaces.

snmp-engine-id {ip ip-addr Speciﬁes a unique identiﬁer for the SNMP engine.

| local | hex hex-string} To send informs, you must specify the engine ID of the

inform receiver.

To send traps and to allow get and set operations and so

on, specify local as the engine ID.

• hex hex-string - ID is a hexadecimal string.

• ip ip-addr - ID is based on the IP address of the

station running the management application.

Enter the IP address of the station. MSS calculates

the engine ID based on the address.

• local - Uses the value computed from the

switch’s system IP address.

access {read-only | read-notify Speciﬁes the access level of the user:

| notify-only | read-write | • read-only - An SNMP management application

notify-read-write} using the string can get (read) object values on

the switch but cannot set (write) them.

• read-notify - An SNMP management application

using the string can get object values on the

switch but cannot set them. The switch can use

the string to send notiﬁcations.

• notify-only - The switch can use the string to

send notiﬁcations.

• read-write - An SNMP management application

using the string can get and set object values on

the switch.

• notify-read-write - An SNMP management

application using the string can get and set

object values on the switch. The switch can use

the string to send notiﬁcations.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 89

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008