D-Link DWS-1008 Informations techniques télécharger pdf (Page 195)

194

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Access Point Commands

Syntax: set service-proﬁle name auth-dot1x {enable | disable}

name Service proﬁle name.

enable Enables 802.1X authentication of WPA clients.

disable Disables 802.1X authentication of WPA clients.

Defaults: When the WPA IE is enabled, 802.1X authentication of WPA clients is

enabled by default. If the WPA IE is disabled, the auth-dot1x setting has no

effect.

Access: Enabled.

Usage: This command does not disable dynamic WEP for non-WPA clients. To

disable dynamic WEP for non-WPA clients, enable the WPA IE (if not already

enabled) and disable the 40-bit WEP and 104-bit WEP cipher suites in the

WPA IE, if they are not already disabled.

To use 802.1X authentication for WPA clients, you also must enable the

WPA IE. If you disable 802.1X authentication of WPA clients, the only method

available for authenticating the clients is preshared key (PSK) authentication.

To use this, you must enable PSK support and conﬁgure a passphrase or key.

Examples: The following command disables 802.1X authentication for WPA clients that

use service proﬁle wpa_clients:

DWS-1008# set service-proﬁle wpa_clients auth-dot1x disable

success: change accepted.

set service-proﬁle auth-fallthru

Speciﬁes the authentication type for users who do not match an 802.1X or MAC authentication

rule for an SSID managed by the service proﬁle. When a user tries to associate with an SSID,

MSS checks the authentication rules for that SSID for a userglob that matches the username.

If the SSID does not have an authentication rule that matches the username, authentication

for the user falls through to the fallthru method.

The fallthru method is a service proﬁle parameter, and applies to all radios within the radio

proﬁles that are mapped to the service proﬁle.

Syntax: set service-proﬁle name auth-fallthru

{last-resort | none}

last-resort Automatically authenticates the user and allows access to the SSID

requested by the user, without requiring a username and password.

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 195