D-Link DWS-1008 Informations techniques télécharger pdf (Page 196)

195

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Access Point Commands

none Denies authentication and prohibits the user from accessing the SSID.

Note: The fallthru authentication type none is different from the uthentication

method none you can specify for administrative access. The fallthru

authentication type none denies access to a network user. In contrast, the

authentication method none allows access to the switch by an administrator.

Defaults: The default fallthru authentication type is none.

Access: Enabled

Usage: The last-resort fallthru authentication type allows any user to access any

SSID managed by the service proﬁle. This method does not require the user

to provide a username or password. Use the last-resort method only if none

of the SSIDs managed by the service proﬁle require secure access.

Examples: The following command sets the fallthru authentication for SSIDS managed

by the service proﬁle rnd_lab to none:

DWS-1008# set service-proﬁle rnd_lab auth-fallthru none

success: change accepted.

set service-proﬁle auth-psk

Enables preshared key (PSK) authentication of Wi-Fi Protected Access (WPA) clients by

DWL-8220AP radios in a radio proﬁle, when the WPA information element (IE) is enabled in

the service proﬁle.

Syntax: set service-proﬁle name auth-psk {enable | disable}

name Service proﬁle name. enable Enables PSK authentication of WPA clients.

disable Disables PSK authentication of WPA clients.

Defaults: When the WPA IE is enabled, PSK authentication of WPA clients is enabled

by default. If the WPA IE is disabled, the auth-psk setting has no effect.

Access: Enabled

Usage: This command affects authentication of WPA clients only. To use PSK

authentication, you also must conﬁgure a passphrase or key. In addition, you

must enable the WPA IE.

Examples: The following command enables PSK authentication for service proﬁle

wpa_clients:

DWS-1008# set service-proﬁle wpa_clients auth-psk enable

success: change accepted.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 196