D-Link DWS-1008 Informations techniques télécharger pdf (Page 62)

100

101

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

IP Services Commands

ping (continued)

vlan-name VLAN name to use as the ping source. MSS uses the IP address

conﬁgured on the VLAN as the source IP address in the ping packets.

Defaults:

• count - 5.

• dnf - Disabled.

• interval - 100 (one tenth of a second)

• size - 56.

Access: Enabled

Usage: To stop a ping command that is in progress, press Ctrl+C.

Examples The following command pings a device that has IP address 10.1.1.1:

DWS-1008# ping 10.1.1.1

PING 10.1.1.1 (10.1.1.1) from 10.9.4.34 : 56(84) bytes of data.

64 bytes from 10.1.1.1: icmp_seq=1 ttl=255 time=0.769 ms

64 bytes from 10.1.1.1: icmp_seq=2 ttl=255 time=0.628 ms

64 bytes from 10.1.1.1: icmp_seq=3 ttl=255 time=0.676 ms

64 bytes from 10.1.1.1: icmp_seq=4 ttl=255 time=0.619 ms

64 bytes from 10.1.1.1: icmp_seq=5 ttl=255 time=0.608 ms

--- 10.1.1.1 ping statistics ---

5 packets transmitted, 5 packets received, 0 errors, 0% packet loss

set arp

Adds an ARP entry to the ARP table.

Syntax: set arp {permanent | static | dynamic} ip-addr mac-addr

permanent Adds a permanent entry. A permanent entry does not age out and remains in

the database even after a reboot, reset, or power cycle.

static Adds a static entry. A static entry does not age out, but the entry does not

remain in the database after a reboot, reset, or power cycle.

dynamic Adds a dynamic entry. A dynamic entry is automatically removed if the entry

ages out, or after a reboot, reset, or power cycle.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 62

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008