D-Link DWS-1008 Informations techniques télécharger pdf (Page 63)

100

101

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

IP Services Commands

set arp (continued)

ip-addr IP address of the entry, in dotted decimal notation.

mac-addr MAC address to map to the IP address. Use colons to separate the

octets (for example, 00:11:22:aa:bb:cc).

Defaults: None Access: Enabled

Examples: The following command adds a static ARP entry that maps IP address 10.10.10.1

to MAC address 00:bb:cc:dd:ee:ff:

DWS-1008# set arp static 10.10.10.1 00:bb:cc:dd:ee:ff

success: added arp 10.10.10.1 at 00:bb:cc:dd:ee:ff on VLAN 1

set arp agingtime

Changes the aging timeout for dynamic ARP entries.

Syntax: set arp agingtime seconds

seconds Number of seconds an entry can remain unused before MSS removes the

entry. You can specify from 0 through 1,000,000. To disable aging, specify 0.

Defaults: The default aging timeout is 1200 seconds.

Access: Enabled

Usage: Aging applies only to dynamic entries. To reset the ARP aging timeout to its default

value, use the set arp agingtime 1200 command.

Examples: The following command changes the ARP aging timeout to 1800 seconds:

DWS-1008# set arp agingtime 1800

success: set arp aging time to 1800 seconds

The following command disables ARP aging:

DWS-1008# set arp agingtime 0

success: set arp aging time to 0 seconds

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 63

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008